NetPeppers WFM50

Video Microscope for testing Fiber Optic Connectors

The NetPeppers WFM50 is a portable video microscope to be connected to the OTDR1000. It checks fiber optic connectors for dirt or damage caused by scratches.

It is the ideal inspection device for technicians and installers who are involved in the installation of LAN and FTTX fiber optic networks and want to provide proof of the cleanliness of the installed system.

[Translate to English:] NetPeppers LWL Videomikroskop WMF50
[Translate to English:] NetPeppers Videomikroskop WFM50
Play it safe

Make sure that your fiber optic installations are clean and that there is no dirt or damage.

[Translate to English:] NetPeppers Videomikroskop WFM50
Everything documented

The WFM50 is fully integrated into the OTDR1000 test sequence and PDF reports can be generated on the condition of the tested fiber optic connectors.

[Translate to English:] NetPeppers Videomikroskop WFM50
Maximum compatibility

Numerous interchangeable tips enable adaptation to all standard fiber optic systems on the market, whether straight or angled. Brightness control is also on board.

Features

  • SIMPLE DOCUMENTATION
    Digital, high-resolution image output for complete documentation of fiber optic connectors
     
  • UNIVERSALLY APPLICABLE
    400x resolution of the fiber end face. Suitable for all common fiber optic connectors: APC, UPC, MTP, etc.
     
  • OPTIMIZED WORKFLOW
    Direct connection via USB-C to the OTDR1000 and therefore fully integrated in the test run
Technical Data Fiber Optic Video Mikroskop WFM50
Resolution < 1 μm
Magnification 400 x
Light source Blue LED
Field of view X: 0,349 mm - Y: 0,283 mm
Power supply via connected device (USB)
Brightness regulation yes
Connector 1 x USB-C
Scope of Delivery 1 Video Microscope WFM50, 1 Set Interchangeable Tips (1,25 mm UPC, 1,25 mm APC, 2,5 mm UPC, 2,5 mm APC, SC/APC), 1 Cable USB-C to USB-A, 1 Cable USB-C to USB-C, 1 Carrying Bag
Article No. NP-FIBER41