AEM Network Service Assistant

Multifunction Qualification+ Tester

No longer do users have to decide between the purchase of a qualification network tester or a cable certifier, the Network Service Assistant bridges the gap, with a Qualification+ hybrid solution featuring Certi-Lite.

 

[Translate to English:] AEM Netzwerkqualifizierer NSA
Qualification

The multi-gigabit auto-test quickly establishes that a cable connection supports the desired network rate.

 

PoE-Validation

Validates the real power load at the outlet where the end device is used.

 

Testing the Network Connectivity

Tests the wired and wireless connectivity of the network

Network Service Assistant

Quick Start Video

See how easy it is to use the NSA

 

Wireless Network Connectivity

Certi-Lite - CAT5e - CAT6A

Advanced Link Identification ALI

OTDR (coming soon)

PoE Validation

Multi-Gig Ethernet

Wired Network Connectivity

Wireless Network Connectivity

Certi-Lite - CAT5e - CAT6A

Advanced Link Identification ALI

OTDR (coming soon)

PoE Validation

Multi-Gig Ethernet

Wired Network Connectivity

Certi-Lite

[Translate to English:] CAT5e - CAT6A Certi-Lite

Cable Test for CAT3 - CAT6A

  • Certi-Lite performs an ANSI/TIA 1152-A compliant, single ended cable test for CAT3 – CAT6A, with a simple Pass/Fail indication.
     
  • This provides you with assurance of cabling link integrity to support your requirements.
     
  • The NSA performs this test using a small passive termination at the remote end, which helps to significantly reduce the overall cost of the test equipment when compared to traditional cable certifiers

Report Generation

  • Test results can be sent to TestDataPro Cloud test results repository via wired or wireless connection
     
  • Results can also be saved to memory for later upload to the PC based version of TestDataPro results management software

Advanced Link Identification ALI

[Translate to English:] AEM NSA Netzwerkqualifizierer mit Remotes

Save Time and Ressources

  • AEM takes link identification to the next level with Certi-Lite capable numbered remote IDs
     
  • Unlike your typical “dumb” remote ID’s that simply tell if you have connected to number 1,2,3 and so on, AEM remote ID’s are smart, and are capable of supporting Certi-Lite
     
  • This allows you to qualify up to 8 cabling lines in a row for different IEEE applications or up to 10 Gig transmission rates from the patch panel using multiple remote IDs from the ALI system

Power Over Ethernet Validation

[Translate to English:] Power over Ethernet Validierung

Comprehensive Test Functionality

  • NSA has the ability to validate Real Power load at the jack where and end device will be deployed.
     
  • NSA emulates a Powered Device (PD), such as a WAP or Camera by setting it to the specific standard applicable to that device.
     
  • NSA negotiates with the Power Source Equipment (PSE) to request information about the switch and the highest level of power load from the PSE for the selected standard.
     
  • For those pesky intermittent power issues, NSA can monitor power load over time.
     
  • This allows you to monitor live for any power fluctuation that drops below the required level threshold.Equipment (PSE), um Informationen über den Schalter und den höchsten Grad der von der PSE für den gewählten Standard anzufordern.

Quick Testing

  • NSA can also characterize the cabling links for DC resistance unbalance parameters either as part of a standard Certi-Lite Autotest or as a one-off quick test.

OTDR Testing (coming soon)

AEM Network Service Assistant with OTDR adapters

Fiber optic test

  •     The NSA is the first qualifier in the world to be able to perform a full OTDR measurement on fiber optic links using optional OTDR adapters, thus optimally combining copper and fiber optic testing in one device.
     
  •     The Multimode and Singlemode OTDR adapters have small dead zones and sufficient dynamic range to meet all challenges in network level 3/4.
     
  •     The OTDR adapters allow technicians to pinpoint the location of a fiber break or other loss event to the centimeter.

Multi-Gigabit Link Speed

Speed Qualification

  • NSA performs this Signal to Noise Ratio (SNR) based test while under both traffic and PoE load, if a PSE is present.
     
  • This provides a real-world scenario of performance, to ensure the data signal can get through the noise on the wire.
     
  • NSA’s Multi-Gigabit Autotest is a quick and easy one button operation to ensure that a cabling link will support the desired network rate.
     

Validation Test

  • 10/100 Mpbs, 1 Gbps
     

PoE Load Test

  • 802.3 af/at/bt, UPoE
     

Quality of Service-Test

  • SNR 2.5 Gigabit, SNR 5 Gigabit, SNR 10 Gigabit
[Translate to English:] Multi-Gig Ethernet

Wired and Wireless Network Connectivity Testing

BASE-T Wired Ethernet Connection Details

  • Perform Network Discovery to see what’s behind the jack.
  • Switch detail including slot/port/VLAN.
  • Display list of IP addresses for connected devices.
  • Select any IP address to view that device details, MAC address, and more.
  • View LAN details such as Gateway, Subnet Mask, DHCP Server.
  • Generate traffic to any desired IP address.
  • Perform Trace Route to see the connection path and intermediate hop delays for bottlenecks.
  • Use Ping to verify point-to-point or Internet connectivity and response time.

WI-FI Ethernet Connection

  • NSA’s auto-discovery will display all detected SSID’s and their associated RSSI (received power level). This is useful in determining if the Wi-Fi network to which the user is trying to connect has sufficient signal strength.

  • Determine Wi-Fi “dead zones” by roaming to checking RSSI values in different locations.

  • Connect to any SSID using the appropriate credentials for that network.

  • Use Ping to verify point-to-point connectivity or out to the Internet by selecting pre- defined or custom website URLs and see latency details

Technical Data NSA
Battery Lithium-Ion, 3.7v, 13.200 mAh
Appx. Test Time: 8hrs (based on approximately 200 tests per day)
Charging time : 7hrs
Operating System Linux
Software TestDataPro PC software, TestDataPro Cloud
RJ45 Test Ports AD-NSA Test Adapter
Network Connectivity Testing
PoE load testing
2.5G / 5G / 10G Multi-Gig Link speed testing
CAT3 – CAT6A Certi-Lite Channel
Integrated RJ-45 side port
10 / 100 / 1G BASE-T testing
Data Transference USB flash type A, Micro USB, USB cable, Wired network connection, Wireless network connection
Adapter Interface 60-pin high-frequency connector, rated for 5000 insertion cycles, hot swappable for testing flexibility and expansion
Power Adapter 5V, 3A (supplied), 5-12V (supported), 2.1mm DC Jack
Dimensions 200mm x 105 mm x 50 mm
Display 5" TFT Color Display
Resolution: 800 x 480 px
Features Basic Advanced
Certi-Lite Qualification
Live-Wiremap
Distance to Fault
Remotes No. 2-8
DC Loop Resistance & P2P
PoE Load and Validation Testing
Multi-Gig Autotest
Multi-Gig (0,1/1/2,5/5/10G) SNR
Wireless Network Connectivity*
Reporting with PASS/FAIL Analysis
TestDataPro Results Management Software
Artikel-No. AEM-NSA-KIT-100 AEM-NSA-KIT-150
Scope of Delivery: Power supply unit, shoulder strap, USB cable, USB memory stick with TestDataPro software, CAT6A RJ-45 connector, large carrying case NSA Device, Copper Test Adapter, Remote ID #1 NSA Device,Copper-Test Adapter, Remote ID #1-8

Datasheet

All product information and data summarized.

DOWNLOAD

Brochure

Comprehensive product introduction download here.

DOWNLOAD

Quick Reference Guide

Get the quick reference guide here

DOWNLOAD

Any Questions?

We look forward to help you!

 

I agree that NetPeppers GmbH may contact me (by telephone or e-mail) and store the data I have provided for this purpose. The Privacy Policy I have thereby taken note of.