NetPeppers Crimp Splice Protection
Protective sleeves for reliable protection of the splicing point
The splice protection press is required to optimally attach the splice protection to the glass fiber. The splice protection is compressed to the required extent. To operate the splice protection press, the splice protection is inserted into the press and the spliced glass fibre is inserted into the V-slot with the hands. The thumb pressure causes the splice protection to close.
Technical Data | Crimp splice protection sleeves |
---|---|
Suitable for |
Bare fibre (125 μm) Primary coating (250 μm) |
Outer Ø (D) | 1,2 (+/-0,1) mm (crimped) |
Height (H) | 3,2 (+/-0,1) mm, crimped |
Length (L) | 30 (+/-0,5) mm, crimped |
Storage | - 40 to +60 °C |
Operating Temperatur | - 55 to +105 °C |
Humidity | 0 to 95 % Rh |
Colour | silvery-metallic |
Crimp splice holder suitable | YES |
EN 50411-3-3 | F1-NA-30-P-00 |
TS 0338/96 Conformity | YES |
Order-No. | NP-FS-Protect-C-12-30 |