Versatile Use
The set supports RJ11, RJ45 and two-wire cables via alligator clip adapter to enable tone localization on a wide variety of systems.
Always Audible
The 3.5 mm headphone jack makes it easy to locate sounds on cable routes in noisy environments.
Correctly Wired
The CTK50 kit has a simple wiring test via LEDs for RJ45. Shielding is also taken into account.
| Technical Data | Cable Tone Receiver CTR50 | Cable Tone Transmitter CTT50 |
|---|---|---|
| Application Range | Detection and identification of shielded and de-energized cables | Detection and identification of shielded and de-energized cables |
| Functional principle | analog | analog |
| Function modes | - | 3 (wiremap, toning, analog telephone detection, short circuit detection) |
| Voltage-safe up to | - | 60V AC/DC |
| Volume control | Infinitely variable rotary control | - |
| Tone reception | Sensor tip, RJ45 socket | - |
| Tone output | Speaker, 3,5mm jack | - |
| Sound | - | Double tone |
| Wiring diagram | 9 sequential LEDs (8 wires + shield) | 9 sequential LEDs (8 wires + shield) |
| Device connections | - | RJ45/RJ11 |
| Flashlight | White LED | - |
| Other LEDs | Signal strength, ON/OFF | - |
| Max. transmission length | - | <= 1000 m |
| Weight | 123 g | 111 g |
| Dimensions (L x W x H) | 125 x 38 x 29 mm | 125 x 45 x 31 mm |
| Battery | 9V block battery | 9V block battery |
| Scope of Delivery |
1 CTR50 Tone Receiver 1 CTT50 Tone Transmitter 1 RJ45 patch cable (20 cm) 1 RJ11 patch cable (20 cm) 1 RJ11 to 2 x Alligator Clip Cable (20 cm) 2 9V block battery 1 belt bag |
|
| Order-No. | NP-LAN-CTK50 |